Binders for Briquette of Scrap Iron

Product Description:

Jianjie® scrap iron binder is made of polymeric environmental protection materials , with hydrophilic, complexating, cold-setting properties, for processing iron powder, iron chips, iron slag, steel slag and other waste materials, the scrap iron pellet is widely used in steelmaking furnace, and has been recognized by the majority of customers.

Product Detail

Product Tags

Range of Application

Used for pelletizing iron dust, iron chips, iron/steel slag and other slag waste.

Product Specification

Binder Technical Specification




Fluid powder

Fineness: (-250 μm) (%)


Moisture Content (%)




Bulk Density (g/L)


Viscosity (mPa·s)


All kinds of iron and steel scrap, such as iron powder, iron filings and iron/steel slag, can be bonded with scrap iron binder.

This innovative technology has been widely adopted by the metallurgical industry to recover iron resources from scrap iron and steel scrap to improve resource sustainability while reducing production costs and increasing enterprise output. In addition, these binders are better than traditional inorganic binders because of their low dosage, strong adhesion, high pellet formation rate, and less powder.

When the binder of scrap iron pellets is used, the pellets have sufficient mechanical strength and sufficient crushing strength in pellet production and transfer.

Adding blast furnace smelting can improve the quality of iron products and smelting efficiency, not only satisfying blast furnace smelting Process requirements, and can undergo long-distance transportation and long-term storage. Through this process, not only the existing iron and steel scrap resources are used rationally, but also the pollution to the environment can be reduced, and the large need for high quality lump iron ore for blast furnace can be relieved, which helps to solve the increasingly tight problems of iron ore resources and railroad transportation, etc., with large economic and social benefits.

Product Characteristics

Requiring only mixing the binder and material prior to stirring with water and cold-pressing.

Binding Strength:
It exhibit high binding performance, forming rate, and cold/hot strength, making them suitable for furnace smelting.

Less Binder for More Products:
Thus during cold-presses, this feature result in lower production cost.

Outsanding Effect:
Each ton of binder can produce 35-50 tons of pellets. The pellets have a high forming rate of 98% and a 3m-drop integrity.

Product Maintenance


Store the bags at a cool, aired and dry place.
Put them on a damp-proof cushion or pallet.
Exposure to the sun or rain is strictly prohibited.


Keep from rain and damp.
Keep the bag intact, dry and clean.

Our Services

We can customise the solutions according to the needs of customers, provide supporting services such as production line design and equipment upgrade, adjust the parameters of the product according to their trial situation, and realise the performance and feasibility demanded by the customers. We have a professional team of experts with extensive theory and engineering practice experience specialising in binder engineering research and development, engineering design, manufacturing, technical support. We provide technical consultation, scheme design, product manufacturing, equipment selection and procurement, installation and commissioning, binder supply and production operation, and after-sales service. We also provide "turnkey" solutions, either as EPC (Engineering Procurement Construction) service or staged EPC service.

Our Factory

Jianjie Group invested 15 million USD to build a new composite material production base and automated production line in Dazhou, Sichuan Province.
It covers an area of more than 13,300 square meters and has nearly two hundred employees. We focus on binder industry for 20 years and our products are exported to more than 15 countries.With an annual production capacity of up to 300,000 tons, the production scale is among the top in the same industry in China.
Our main products are pre-gelatinized starch, air dried pellet binder, dedusting ash pellet binder, RHF dezincification deusting ash binder, carbon additive binder, metallurgical furnace binder, drilling fluid filter loss reduction agent, coke powder binder, etc.

Service Process




What are the advantages of your products?

Our products have strong product adhesion, high forming rate & anti-calcium properties, and are also environmentally friendly & cost-effective.

Can you solve the problem of poor strength of my product?

Yes, we can. Our binder can increase strength and viscocity.Customised products are also available according to your requirements.

What is the shelf life of your products?

One year.


How about your delivery and transportation time?

It normally takes 3-5 working days for production.It usually takes 30-45 days by sea to your port .

What is your term of delivery?

Our term of delivery are FOB , CFR and CIF.

What is your terms of package?

25KG per plastic woven bag or 1000KG per plastic woven bag.

  • Previous:
  • Next: